- Rebar Chairs & Spacers
- Rebar Placing & Fixing
- Casing Spacers
- Casing End Seals
- Penetration Seals
- Flange Insulating Gasket Kits
- Flange Band Protectors
- Rubber coated u-bolts
- Safety Spray Shields
- Radolid® Protection Caps
- Wall Sleeves
- Hammer Cushion Pads
- Monolithic Insulating Joints
- Meter Service Fitting
- DuoCon Centralizers
- Foreman Night Caps
- Pipe Support Systems
- Corrosion Isolators
Only the application of coordinated materials guarantee the smooth workability of
RECKLI-Formliners. Only the use of RECKLI-Formliner accessories make up a complete system.
| Deacription | Consumption | Packaging | Product code |
| RECKLI Formliner Cleanser
Used only for cleaning of the back of RECKLI Formliners 1/.. and 2/.. before glueing |
Approx. 250 cm³/m² will ensure that
solvents evaporate completely |
1 liter
5 liters |
08011
08010 |
| RECKLI Formliner Adhesive
Used for glueing RECKLI Formliners 1/.. and 2/.. and moulds made from RECKLI PUR Elastomer. Apply to the entire surface, two components |
Mixing ratio
8 : 1 by weight Approx. 750 - 1000 g/m² |
4,5 kgs
2,25 kgs 1 kg |
03008
03009 03094 |
| RECKLI Primer MK
Used for increasing the bonding when glueing RECKLI Formliners 1/.. and 2/.. with RECKLI Formliner. Apply on to steel surfaces, two components. |
Mixing ratio
Weight 4 : 1 Approx. 200 g/m² |
4,5 kgs
1 kg |
07223
07224 |
| RECKLI Elasto Filler
Two-component plastic filler for repairing of RECKLI Formliners or moulds made from RECKLI PUR Elastomer |
Mixing ratio
Weight 8 : 1 specific gravity 1.4 |
0,45 kgs | 03006 |
| RECKLI Mould Paste PU
pourable paste, two components, for making flexible stop-offs on RECKLI-Formliners |
Mixing ratio
Weight 10 : 1 usage depends on the type of pattern specific gravity 1.4 |
5,5 kgs
1 kg |
03005
03015 |
| RECKLI Mould Wax
solvent containing precious hard wax for the safe separation when making stopp-offs with RECKLI Mould Paste PU on RECKLI Formliners |
approx. 50-100 cm³/m² | 5,5 liters
1 liter |
04004
04016 |
| RECKLI Stripping Wax TL
aqueous non-polluting ready-for-use wax-based release agent, suitable for RECKLI Formliners and other non-absorbent formworks like sealed plywood or plastic-coated plates |
approx. 80-100 g/m²
spray in fine coats, remove surplus from pattern bottom |
25 kgs
9 kgs 4,5 kgs |
04023
04024 04027 |
| RECKLI Formliner Knife
rugged, handy knife with stationary blade for cutting RECKLI Formliners 2/.. |
09008 | ||
| RECKLI Serrated Trowel
for spreading of pasty or liquid material evenly, especially for RECKLI Matrix Adhesive, blade size approx. 14 x 28 cm, tooth depth approx. 2 mm. |
09006 | ||
| RECKLI Spiral Stirrer with bottom ring
made to fit onto power drills, to mix liquid or pasty materials. |
Ø 60 mm
Ø 80 mm |
09012
09013 |